Arriflex 435

The smallest and lightest modern sync sound camera

SKU wp-pennant
Category
Tags, ,

Περιγραφή

The Arriflex 435 is a movie camera product line created by Arri in 1995 to replace the Arriflex 35III line. The number reflects its position as a successor camera to the Arri III and the fact that it is designed for 35 mm film. The 435 cameras are specifically designed as MOS cameras, which means that they are conventionally considered to be too loud to record usable location sound.

For more information about the product, please visit the manufacturer’s web page by clicking here

Variant models
435 (manual shutter), 435ES, 435 Advanced, 435 Xtreme
Manufacturer
Introduced
1995 (435 and ES), 2001 (Advanced), 2004 (Xtreme)
Weight
6.5 kg/14.3 lbs without magazine
Movement
Five link[citation needed] with dualregistration pins and pulldown claws, 3 or 4-perf pulldown
1-150 frames per second, forward and reverse, expanded to 0.1-150 for Advanced and Xtreme. Crystal accurate to 0.001 frame/s. Integrated capping shutter for single frame or intervalometer functions.
Aperture size
.945″ x .710″
Aperture plate
removable
Motor
DC with quartz crystal control
Operating noise level
Indicators
speed, run, counter (ft or m), shutter angletime code (user bit and sensitivity level), voltage, incorrect movement, asynchronous speed, low battery, film end
Arri PL (Super 35 compatible)
Lens control
Arri-style follow focus. Integrated Lens Data System (LDS) and Lens Control System (LCS) in Advanced and Xtreme models; may be added as accessory for manual and ES.
reflex mirror; manual model stops at 11.2°, 22.5°, 30°, 45°, 60°, 75°, 90°, 105°, 120°, 135°, 144°, 172.8° and 180°, all other models can be adjusted continuously between 11.2° and 180° while either running or in standby mode
covers Super 35, rotates 360° and to left or right of camera with manal adjustment to maintain upright image. Can be used with either eye.Anamorphic switch available. Standard 80/20 beamsplitter, but entire viewfinder and beamsplitter can be replaced with 100% video tap forSteadicam or remote rigging.
Integrated Video System (IVS) or IVS-2; Standard 0.5 inch CCD camera mountable through C-mount
Interchangeable. Arriglow module available.
top-mounted, available in 400 ft (122 m), 1000 ft (300 m), and 400 ft (120 m) Steadicam sizes. 1,000 ft (300 m) mag has torque motors. Older fixed-loop mags from Arri III and Arri II can be used to 120fps.
Magazine loading
fixed-loop displacement mags, takes up emulsion in (9P design)
Film cores
standard cores
Arriflex MB or LMB models, 19 mm rods
Electronic accessories
24 V, 3/5 A and 12 V, 3/5 A ports; shutter timing shift box (TSB), handcrank extension (HC), external display (EXD), zoom control (ZMU), wireless remote system (WRS), wireless remote control (WRC), remote control unit (RCU), universal motor controller (UMC), lens data archive (LDA), heated eyepiece (HE), lens data mount (LDM), integrated video system (IVS), Varicon flashing unit, rain deflector, Arrimotion data box, external sync unit (ESU), cine tape measure, accessory power box (APB), remote switch (RS), onboard video monitor, functional expansion module (FEM), motion control interface (MCI), CHS module for 130+ frame/s, lens data display (LDD)
Optical accessories
shift and tilt lens system, eyepiece leveller, pentafinder, wide angle eyepiece
Other accessories
lightweight follow focus (LFF), lightweight support rods, third party accessories
Batteries
24V
Environment protection
third party covers and housings, rain deflector
Camera support
Arrihead, bridge plate, handgrip, shoulder set, shoulder cushion, underslung bracket for Steadicam

For any queries or clarifications call us at +30 2102690735