ETC SOURCE 4WRD

Description

Features:

• LED details: S4WRD II LED
• Max lumens (3200 K / 3200 K Gallery / Daylight Gallery): 11,430 / 9,716 / 10,333
• Lumens per watt (3200 K / 3200 K Gallery / Daylight Gallery): 120 V: 76.2 / 64.8 / 68.9 | 230 V: 65.3 / 55.5 / 59.0
• L70 rating (hours to 70% output): > 45,000 hours
• Colors used: Warm or Cool White
• Color temperature range: 3200 K 80 or 90+ CRI, 5900 K 90+ CRI
• Calibrated array: N/A
• Red shift: No
• Field angle range: Swappable lens tubes between 5 – 90 degrees
• Gate size: 79 mm
• Aperture size: Lens dependent
• Pattern projection: Yes
• Pattern size: A or B (see manual)
• Camera flicker control/Hz range: No, not PWM dimmed
• Input method: DMX Control or Line Dimmed
• Protocols: DMX / RDM via RJ45
• Modes (Footprint): 1 Channel (Intensity) for DMX
• RDM configuration: Yes
• UI type: 7-segment address display, local level control via UI
• Local control: Yes
• Onboard presets: No
• Onboard sequences: No
• Onboard effects: No
• Fixture to fixture control: No
• Voltage range: 114–125 V, 60 Hz (120 V) / 209–252 V, 50 Hz (230 V)
• Input method: Hard-wired, 1 m cord, Edison plug (120 V) / Hard-wired, 1 m cord, bare end (230 V)
• Inrush: 30 A (first half-cycle) at 120 V / 12 A (first half-cycle) at 230 V
• Fixtures per circuit 120 V: 14 (20 A switched circuit, R20 module or similar) / 230 V: 6 fixtures per non-dimmed circuit (ER15AFR module)
• Wattage (Typical/Standby): 150 W / 1.2 W (120 V) / 175 W / 3.7 W (230 V)
• Current draw: 1.26 A at 120 V / 0.75 A at 230 V
• Materials: Die-cast aluminum
• IP rating IP-20, indoor only
• Weight 3.73 lb (1.69 kg) (Retrofit only)